The LINX 140 Drinking Water Systems
Water Filters and Drinking Water Systems
LINX 140 Drinking Water Systems
With Dial-A-Taste technology, you can actually customize the taste of your water!
Provides similar water quality to traditional reverse osmosis filters and uses an ion exchange process powered by electricity rather than chemicals that can save you 1000’s of gallons in wasted rinse water.
The SMARTEST drinking water system ever.
The latest technology in Drinking Water –
with an environmental conscience.
Advantages:
- Practically UNLIMITED water – the tank fills in minutes for a continuous supply of fresh, great-tasting water.
- The Dial-A-Taste® Control allows the consumer to customize the taste of their drinking water for more or less mineral content. Choose Spring Water, Drinking Water, or Purified Water flavor.
- Significantly less water waste than Reverse Osmosis (up to 90% less).
- Operates using programmable software and display indicator lights that provide the consumer with detailed system status.
- Run the line to your ice maker for great-tasting ice cubes.
Exceptional Warranty (See Warranty Terms for Details)
- Limited Life Time Warranty for the system excluding the components below.
- The LINX TDS reduction cartridges are warranted to produced 650 gallons of treated water each.
- Drain valves are warranted for 3 years on soft water and 1 year on hard water.
- Feed valves are warranted for 3 years.
- The power supply and electrodes will be warranted for a period of 3 years.
- This warranty does not cover the disposable Sediment and/or Carbon Filters whose life depends on feed water conditions.
LINX 140T Specifications:
| LINX 140T: | 19.1 in (deep) x 8.2 in (wide) x 14.3 in (high) |
| Water Storage Tank: | 11″ W x 14″ L with stand |
| Feed Water Quality: | Potable water with maximum TDS of 1000 ppm for LINX 140T system, <20 grains of hardness (340 ppm hardness as CaCO3), pH 4 – 10; microbiologically safe |
| Feed Water Pressure: | 20-100 psi (130-690 kPa) |
| Feed Water and Operating Temperature: | 33-100˚F (1-40˚C) |
| Operation Mode: | Parallel LINX cell deionization; water is available during regeneration |
| Regeneration: | 34 minutes (17 minutes each cell) |
| TDS Rejection* (Maximum Dial): | ≥85% TDS reduction |
| LINX System Water Output Flow Rate: | 0-600 ppm TDS feed: 0.5 gpm at ≥40 psi 600-800 ppm: 0.25 gpm (see Replacement Parts list for flow restrictor) |
| LINX 140T System with tank only: | 800-1000 ppm: 0.15 gpm to fill tank |
| LINX 140T Tank Flow Rate to Faucet: | 1.0 gpm, maximum |
| Water Output Volume per Cycle: | 0-400 ppm TDS feed: 3.0 gallons per 34 minute regeneration cycle 400-1000 ppm TDS feed: 1.5 gallons per 34 minute regeneration cycle |
| Rated Capacity**: | 3 gallons/cycle |
| Rated Life***: | 650 gallons for LINX 100 Sediment and LINX 100 or 110 Carbon filters 1300 gallons for two (2) LINX 100 TDS cartridges |
| Warranted Water Output per Day: | ≤25 gallons (if product exceeds 25 gallons per day on average, the warranty is no longer valid) |
| Water Recovery: | 0-400 ppm TDS feed: 70%; 401-1000 ppm TDS feed: 55% |
| Operating Voltage, Current: | 100-120 Vac, 50/60 Hz, 6 A |
| Outside Dimensions: | 19.1 in (deep) x 8.2 in (wide) x 14.3 in (high) |
*TDS reduction was tested and verified at an independent laboratory: Pace Analytical Services, Inc.
**Each unique model designation shall not claim a capacity or service life greater than the least reduction capacity or service life that has been verified through testing to NSF/ANSI 53.
***The rated lives of LINX 100 TDS cartridges and Sediment/Carbon filters is based on extensive testing by the manufacturer.
The LINX 140T Drinking Water Systems conform to NSF/ANSI 53 for nitrate/nitrite reduction as verified and substantiated by test data.
Contaminant Reduction
LINX 140T better at reducing nitrates/nitrites than R.O. filters
The LINX 140T has been certified by WQA using NSF/ANSI Standard testing to reduce Nitrates by 90.5% and Nitrites by 86%. These reduction levels are far superior than traditional reverse osmosis filters.
Besides Nitrates and Nitrites, Pace Laboratories has also conducted independent tests that show the LINX 140T greatly reduces the following contaminants: Arsenic V, Chromium VI, Copper, Fluoride and Lead among others. For a complete list of contaminant reduction as tested by Pace Laboratories, click on a link below.
- NSF/ANSI Standard 53 – 2009 Low pH Copper Reduction
- ANSI/NSF 53-2009 Low pH Arsenic V Reduction
- NSF/ANSI Standard 53- 2009 Low pH Lead Reduction
- NSF/ANSI Standard 53 – 2009 Low pH Selenium Reduction
- ANSI/NSF 53-2009 Fluoride Reduction
- NSF/ANSI Standard 53- 2009 Low pH Barium Reduction
- NSF/ANSI Standard 53- 2009 Low pH Cd Reduction
- Modified NSF/ANSI 42-2009 TDS Reduction
- NSF/ANSI Standard 53- 2009 Hexavalent Chromium Reduction
The LINX 140T Drinking Water System includes:
The LINX 140T Drinking Water System with Dial-A-Taste
Limited lifetime warranty, click here for details*
One LINX 100 Sediment pre-filter, with a rated life of 650 gallons**
Two LINX 100 TDS cartridges to reduce nitrate/nitrite contaminants for healthier water and other total dissolved solids (TDS) for better taste.
Comes with a rated life of 1300 gallons for two (2) LINX 100 TDS cartridges
One LINX 100 or 110 Carbon post-filter (GAC), with a rated life of 650 gallons*
One LINX approved water spigot
One authorized LINX water storage tank, (sizes can vary depending on your needs).
* The LINX 140T must be installed and registered by an authorized dealer. Certain other restrictions may apply. Click here for details.
**The rated lives of LINX 100 TDS cartridges and Sediment/Carbon filters is based on extensive testing by the manufacturer.
DIAL-A-TASTE
With Dial-A-Taste technology, you can actually customize the taste of your water!
LINX 140 T lets you adjust the taste of your water. Read more …
